严万波,高学农,黄晓烁,徐文东,陈仲

• 1:华南理工大学化学与化工学院传热强化与过程节能教育部重点实验室

摘要(Abstract)：

介绍了LNG(液化天然气)换热过程所根据的相关理论进展,重点论述国内外LNG换热器强化传热应用的研究进展,针对其中的研究背景、研究方法和结果,提出了研究结论不具普适性、换热因素分析多停留在定性分析,无法上升到定量分析等问题,并根据我国LNG换热器强化传热研究的情况,提出LNG换热器下一步的研究方向,如加强多相流传热过程理论分析、开展多工况换热分析等。

关键词(KeyWords)： 液化天然气;换热器;强化传热;数值分析

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 严万波,高学农,黄晓烁,徐文东,陈仲

参考文献(References)：

• [1]Launder B E,Spalding D B.The numerical computation of turbulent flows[J].Computer Methods in Applied Mechanics and Engineering,1974,3(2):269-289.
• [2]Yakhot V,Smith L M.The renormalization group,the?-expansion and derivation of turbulence models[J].Journal of Scientific Computing,1992,7(1):35-61.
• [3]Shih T H,Liou W W,Shabbir A,et al.A new k-?eddy viscosity model for high Reynolds number turbulent flows[J].Computers&Fluids,1995,24(3):227-238.
• [4]Wilcox D C.Turbulence modeling for CFD[M].La Canada,CA:DCW Industries,1998.
• [5]Menter F R.Two-equation eddy-viscosity turbulence models for engineering applications[J].AIAA Journal,1994,32(8):1598-1605.
• [6]Versteeg H K,Malalasekera W.An introduction to computational fluid dynamics:the finite volume method[M].New York:Pearson Education,2007.126-127。
• [7]HU Kun(胡坤),LI Zhen-bei(李振北).The project examples of ANSYS ICEM CFD(ANSYS ICEM CFD工程实例详解)[M].Beijing(北京).Post and Telecom Press(人民邮电出版社).2014.318-319。
• [8]Dittus F W,Boelter L M K.Heat transfer in automobile radiators of the tubular type[J].International Communications in Heat and Mass Transfer,1985,12(1):3-22.
• [9]Gnielinski V.New equations for heat and mass-transfer in turbulent pipe and channel flow[J].International Chemical Engineering,1976,16(2):359-368.
• [10]Sieder E N,Tate G E.Heat transfer and pressure drop of liquids in tubes[J].Industrial and Engineering Chemistry,1936,28(2):1429-1435.
• [11]Chen J C.Correlation for boiling heat transfer to saturated fluids in convective flow[J].Industrial&Engineering Chemistry Process Design and Development,1966,5(3):322-329.5.
• [12]Shah M M.A new correlation for heat transfer during boiling flow through pipes[J].Ashrae Transactions,1976,82(2):66-86.
• [13]Klimenko V V.Generalized correlation for two-phase forced flow heat transfer-second assessment[J].International Journal of Heat and Mass Transfer,1990,33(10):2073-2088.
• [14]Gungor K E,Winterton R H S.A general correlation for flow boiling in tubes and annuli[J].International Journal of Heat and Mass Transfer,1986,29(3):351-358.
• [15]Liu Z,Winterton R H S.A general correlation for saturated and subcooled flow boiling in tubes and annuli,based on a nucleate pool boiling equation[J].International Journal of Heat and Mass Transfer,1991,34(11):2759-2766.
• [16]YAO Yang(姚杨),JIANG Yi-qiang(姜益强),MA Zui-liang(马最良).Change of frost density and thickness for finned-tube heat exchanger under frosting(翅片管换热器结霜时霜密度和厚度的变化)[J].Journal of Engineering Thermophysics(工程热物理学报),2003,24(6):1040-1042.
• [17]SU Hai-lin(苏海林).The surface frosting mechanism research of fin-tube heat exchanger under low-temperature(低温翅片管换热器表面结霜机理研究)[D].Lanzhou(兰州):Lanzhou University of Technology(兰州理工大学),2008.
• [18]XIE Fu-shou(谢福寿).Research on design and calculation of air-heated cryogenic finned-tube vaporizer under frosting condition(结霜工况下空温式深冷翅片管气化器设计计算研究)[D].Lanzhou University of Technology(兰州理工大学),2013.
• [19]CHEN Rui-qiu(陈瑞球),ZHOU Guang(周广).An experimental investigation on the effect of the frosting on surface heat transfer coefficient of finned heat exchanger(霜形成对翅片管换热器空气侧表面传热系数影响的实验研究)[J].Cryogenics and Superconductivity(低温与超导),2010(4):54-56.
• [20]LIU Xiao-chuan(刘小川).Numerical simulation on heat and mass transfer of frost formation on finned tube heat exchanger(结霜工况下翅片管换热器传热传质的数值模拟)[D].Shanghai Jiao Tong University(上海交通大学),2007.
• [21]ZHOU Li-min(周丽敏),LI Xiang-dong(李祥东),WANG Rong-shun(汪荣顺).A theoretical model for heat and mass transfer during frosting on a vertical cryogenic star-shaped fin-tube(竖直低温星形翅片管表面结霜及传热传质理论模型)[J].Cryogenics and Superconductivity(低温与超导),2009(11):60-65.
• [22]ZHANG Shu-tang(张书堂),ZHANG Jie(张洁).Numerical analysis of heat transfer process in LNG ambient air vaporizer(液化天然气空温式气化器传热过程的数值分析)[J].Shanghai Gas(上海煤气),2014(5):1-4.
• [23]YANG Cong-cong(杨聪聪),JIAO Wen-ling(焦文玲),YANG Guang(杨光),et al.Calculation of heat transfer in LNG ambient air vaporizer(LNG空温式气化器的换热计算)[J].Gas and Heat(煤气与热力),2012,32(7):12-17.
• [24]Liu S,Jiao W,Wang H.Three-dimensional numerical analysis of the coupled heat transfer performance of LNG ambient air vaporizer[J].Renewable Energy,2016,87(8):1105-1112.
• [25]ZHAO Zhen-hua(赵振华).Study on heat exchanger enhancement of open rack seawater heater in LPG storage terminal(LPG冷库开架式海水加热器的强化换热研究)[D].Guangzhou(广州):South China University of Technology(华南理工大学),2014.
• [26]SUN Qi-di(孙启迪),CHEN Shu-ping(陈叔平),YAO Shu-ting(姚淑婷),et al.Numerical simulation of freezing on the surface of ORV(低温开架式气化器表面结冰数值模拟)[J].Cryogenics and Superconductivity(低温与超导),2016,3:16-19.
• [27]GUO Shao-ru(郭少儒),ZHANG Shang-wen(张尚文),GUO Chang-rui(郭长瑞),et al.Numerical simulation in the course of heat progress for rib-tube of open rack vaporizer(LNG开架式海水气化器强化传热过程数值模拟)[J].Petro-Chemical Equipment(石油化工设备),2013,6:50-53.
• [28]YANG Fan(杨帆).Research on enhance heat transfer mechanism of open rack vaporizer novel heat transfer tube(开架式气化器新型传热管强化传热机理研究)[D].Xi’an(西安):Xi’an Shiyou University(西安石油大学),2015.
• [29]YU Mei-ling(余美玲).Numerical simulation and optimization of a new open-frame vaporizer with inner spiral tubes(新型开架式内螺旋管汽化器的数值模拟和优化)[D].Guangzhou(广州):South China University of Technology(华南理工大学),2012.
• [30]WANG Meng(王萌).Performance analysis of a novel LNG vaporizer and experimental study on the related falling film heat transfer(新型LNG汽化器传热性能分析及相关液膜传热实验研究)[D].Hangzhou(杭州):Zhejiang University(浙江大学),2014.
• [31]ZENG Cheng(曾诚).Numerical investigation of phase change heat transfer for super open-frame vaporizer(超级开架式气化器相变传热的数值模拟研究)[D].Guangzhou(广州):South China University of Technology(华南理工大学),2015.
• [32]Wang T,Ding G,Duan Z,et al.A distributed-parameter model for LNG spiral wound heat exchanger based on graph theory[J].Applied Thermal Engineering,2015(81):102-113.
• [33]DOU Xing-hua(窦兴华).Numerical simulation of fluid flow and heat transfer in LNG submerged-combustion vaporizer(LNG沉浸式汽化器流动传热过程数值模拟)[D].Dalian(大连):Dalian University of Technology(大连理工大学),2007.
• [34]YU Guo-jie(于国杰),BI Ming-shu(毕明树).Numerical simulation of LNG submerged-combustion vaporizer(LNG沉浸式燃烧型气化器数值模拟)[D].Dalian(大连):Dalian University of Technology(大连理工大学),2009.
• [35]QI Chao(齐超),WANG Bo-jie(王博杰),YI Chong-chong(易冲冲),et al.Operation characteristic and optimization of submerged combustion vaporizer(浸没燃烧式气化器的运行特性及优化)[J].Journal of Chemical Industry and Engineering(China)(化工学报),2015,66(S2):198-205.
• [36]SUN Hai-feng(孙海峰).The calculation and numerical simulation of heat transfer regarding submerged combustion vaporizer for LNG(浸没燃烧式LNG气化器的传热计算与数值仿真)[D].Beijing(北京):Beijing University of Civil Engineering and Architecture(北京建筑大学),2014.
• [37]LI Hong-yu(李泓钰).The study of basic characteristics of submerged combustion vaporizer(浸没燃烧式LNG气化器模拟实验研究)[D].Beijing(北京):Beijing University of Civil Engineering and Architecture(北京建筑大学),2015.
• [38]NIAN Qua-xin(粘权鑫),GUO Shao-long(郭少龙),FANG Wen-zhen(方文振),et al.Numerical simulation on liquefied natural gas submerged combustion vaporizer(液化天然气浸没燃烧式气化器数值模拟方法研究)[J].Journal of Xi’an Jiaotong University(西安交通大学学报),2016,50(1):67-71.
• [39]Han C L,Ren J J,Wang Y Q,et al.Experimental studies of shell-side fluid flow and heat transfer characteristics in a submerged combustion vaporizer[J].International Journal of Heat and Mass Transfer,2016(101):436-444.
• [40]Liang Pu.Thermal performance analysis of intermediate fluid vaporizer for liquefied natural gas[J].Applied Thermal Engineering,2014.65(4):564-574
• [41]BAI Yu-heng(白宇恒),LIAO Yong(廖勇),LU Yong-kang(陆永康),et al.Calculation of heat transfer area of LNG intermediate fluid vaporizer(大型LNG中间介质气化器换热面积计算方法)[J].Natural Gas and Oil(天然气与石油),2013,31(3):31-35.
• [42]XU S,CHENG Q,ZHUANG L,et al.LNG vaporizers using various refrigerants as intermediate fluid:comparison of the required heat transfer area[J].Journal of Natural Gas Science and Engineering,2015(25):1-9.
• [43]ZHANG Zhe(张哲),LI Yan-zhong(厉彦忠),JIAO An-jun(焦安军).Numerical simulation of header construction of plate-fin heat exchanger(板翅式换热器封头结构的数值模拟)[J].Journal of Chemical Industry and Engineering(China)(化工学报),2002,53(11):1182-1187.
• [44]JIAO An-jun(焦安军),LI Ysn-zhong(厉彦忠),ZHANG Rui(张瑞),et al.Effect of header configuration on fluid flow maldistribution in plate-fin heat exchanger(封头结构对板翅式换热器物流分配不均匀性的影响)[J].Journal of Chemical Industry and Engineering(China)(化工学报),2003,54(7):907-912.
• [45]WEN Jian(文键).The investigation of flow field distribution in plate-fin heat exchangers based on PIV technology(基于PIV技术的换热器内部场分布特性研究)[D].Xi’an(西安).Xi’an Jiaotong University(西安交通大学).2006.
• [46]WANG Wei-ping(王伟平).Study on flow distribution characteristics and heat transfer optimization for the heat exchangers and its manifold system in large-scale cold box(大型冷箱内换热器及其配管系统的流体均配与传热优化研究)[D].Hangzhou(杭州):Zhejiang University(浙江大学),2014.
• [47]Li Y,Li Y,Hu Q,et al.Sloshing resistance and gas-liquid distribution performance in the entrance of LNG plate-fin heat exchangers[J].Applied Thermal Engineering,2015(82):182-193.
• [48]HUANG Chao-jin(黄超进).Fluid flow distribution in Plate-Fin heat exchangers(板翅式换热器物流分配特性研究)[D].Shanghai(上海):Shanghai Jiao Tong University(上海交通大学),2010.
• [49]ZHU Yin-hai(祝银海),LI Yan-zhong(厉彦忠).CFD simulation of fluid flow and heat transfer in channels of plate-fin heat exchangers(板翅式换热器翅片通道中流体流动与传热的计算流体力学模拟)[J].Journal of Chemical Industry and Engineering(China)(化工学报),2006,57(5):1102-1106
• [50]QU Le(曲乐).Study on numerical simulation of fluid flow and heat transfer on plate-fin heat exchangers in equipment LNG(LNG5设备中板翅式换热器流动与传热数值模拟研究)[D].Harbin(哈尔滨):Harbin Institute of Technology(哈尔滨工业大学),2007.
• [51]CHEN Yong-dong(陈永东),WU Xiao-hong(吴晓红),ZHOU Bing(周兵).Study of thermal properties calculation of LNG spiral wound heat exchanger(LNG缠绕管式换热器试验研究中的热物性计算方法)[J].Natural Gas Industry(天然气工业).2011,31(6):92-97.
• [52]WU Zhi-yong(吴志勇),CHEN Jie(陈杰),PU Hui(浦晖),et al.Numerical simulation of superheated flow of refrigerant at shell side of LNG spiral wound heat exchanger(LNG绕管式换热器壳侧过热态流动的数值模拟)[J].Gas and Heat(煤气与热力).2014,34(8):6-11.
• [53]Wang T,Ding G,Duan Z,et al.A distributed-parameter model for LNG spiral wound heat exchanger based on graph theory[J].Applied Thermal Engineering,2015,81(2015):102-113.
• [54]DUAN Zhong-di(段钟弟),REN Tao(任滔),DING Guo-liang(丁国良),et al.Multi-zone dynamic model for multi-stream LNG spiral wound heat exchanger(分相的多股流LNG绕管式换热器动态模型)[J].Journal of Chemical Industry and Engineering(China)(化工学报),2015,66(S2):85-94.
• [55]LI Jing-yao(李京瑶),GONG Mao-qiong(公茂琼),TANG Qi-xiong(汤奇雄),et al.Design of coiled-wound heat exchanger in small plant of LNG(小型LNG装置缠绕管换热器的设计)[J].Journal of Chemical Industry and Engineering(China)(化工学报),2015,66(S2):108-115.