新型UV固化粉末涂料的研制Synthesis and Study of Novel UV-Curable Powder Coatings
许杰,李宝芳,罗英武,陈刚,李伯耿
摘要(Abstract)：
合成了无定型、半晶型两种不同结构的不饱和聚酯树脂,由此配制成可紫外光固化的双组分粉末涂料。研究了聚酯树脂结构及树脂配比对涂料固化速度及涂膜附着力、抗冲击、硬度和光泽等性能的影响。结果表明,涂料配方中加入半晶型不饱和聚酯树脂,涂膜的抗冲性能和附着力明显提高,固化后的涂膜综合性能良好。
关键词(KeyWords)： 紫外光固化;粉末涂料;半晶型聚脂;膜性能
基金项目(Foundation): 浙江省科技计划项目资助(011101011)。
作者(Author): 许杰,李宝芳,罗英武,陈刚,李伯耿
参考文献(References)：
- [1]Harris S T.Developments in powder coatings[J].Paintindia.1999,23(1):41-48.
- [2]PANG Lai-xing(庞来兴),YANG Jian-wen(杨建文),ZENG Zhao-hua,et al.(曾兆华等).UV curable powder coatings(紫外光固化粉末涂料)[J].Polymer Bulletin(高分子通报).2002,(2):38-42.
- [3]CHEN Ming(陈明),HONG Xiao-yin(洪啸吟).Progress in UV-curing coatings(紫外光固化涂料的进展)[J].Paint and Coatings Industry(涂料工业).1999,29(12):30-36.
- [4]Fink Dietmar,Brindoepke Gerhard.UV curing powder coatings for heat-sensitive substrates[J].Europe Coating Journal,1995,19(9):606-608.
- [5]Webster G.Accelerated UV drying system[J].Surface Coatings International.1996,79(5):215-220.
- [6]LIU Hui(刘辉),LUO Ying-wu(罗英武),LI Bao-fang(李宝芳).Preparation of UV-curable nano-composite coating by sol-gel process(溶胶-凝胶法制备紫外光固化纳米复合涂料)[J].J Chem Eng of Chinese Univ(高校化学工程学报),2004,18(3):329-333.
- [7]DSM N V.Radiation curable binder composition for powder paint formulations[P].USP5703198,1997.
- [8]DSM N V.Binder composition for powder coatings[P].USP5763099,1998.
- [9]UCB S A.Powder compositions with semi-crystalline polyester and amorphous polyester base containing terminal Methacryloyl groups[P].USP6380279,2002.
- [10]UCB S A.Powder compositions with semi-crystalline polyester and acrylic copolymer base containing ethylenically unsaturated groups[P].USP6384102,2002.
- [11]MA Yue-feng(马越峰),LI Bao-feng,et al(李宝芳等).Study on the cured film properties of UV curing powder coatings.(光固化粉末涂料涂膜性能研究)[J].Thermosetting Resin(热固性树脂),2003,18(3):1-3.
- [12]CHEN Gang(陈刚).Synthesis of the Resin for UV Curable Powder Coatings and Studies on the Properties of the Cured Coating(光固化树脂的制备与涂膜性能的研究)[D].Hangzhou(杭州):Zhejiang University(浙江大学).2003.