王玉珍,高芬,杨健乔,李婧,朱怡彤,方长青,王树众

• 1:西安理工大学印刷包装与数字媒体学院
• 2:西安交通大学热流科学与工程教育部重点实验室
• 3:北控水务(中国)投资有限公司

摘要(Abstract)：

针对超临界水氧化过程中材料腐蚀严重的问题,采用等离子喷涂技术在316 L不锈钢上分别喷涂约0.2 mm的Al_2O_3,ZrO_2和TiO_2涂层以提高其耐腐蚀性。采用间歇式超临界水氧化反应釜研究了各涂层试样在500℃、25 MPa、氧浓度1000 mg×L-1条件下,连续腐蚀80 h的腐蚀特性。对各涂层试样的结合强度及腐蚀前后表面及截面的形貌、元素分布等进行了表征。结果表明,Al_2O_3、ZrO_2和TiO_2涂层的结合强度分别为26.639 N×mm-2、24.526 N×mm-2和40.607N×mm-2。经腐蚀实验后,Al_2O_3涂层表面呈沟壑状,出现较多的孔洞和缝隙,涂层几乎完全脱落;ZrO_2涂层表面原平整致密涂层受到破坏,呈现断裂及碎片化涂层形貌,涂层因腐蚀变薄,剩余厚度约为0.15 mm;TiO_2涂层表面相对比较致密,涂层厚度未发现明显降低,呈现较好的耐腐蚀性能。该研究结果为超临界水氧化过程中金属材料腐蚀防控方法提供一种新思路。

关键词(KeyWords)： 超临界水;腐蚀;316L不锈钢;涂层;Al2O3;ZrO2;TiO2

Abstract:

Keywords:

基金项目(Foundation): 陕西省教育厅自然专项项目(17JK0566)

作者(Author): 王玉珍,高芬,杨健乔,李婧,朱怡彤,方长青,王树众

参考文献(References)：

• [1]Benjumeaa J M,Sánchez-Oneto J.Simulation of supercritical water oxidation reactor in transitory state:Application to time-dependent processes[J].The Journal of Supercritical Fluids,2016,117:219-229.
• [2]Behnamian Y,Mostafaei A.Internal oxidation and crack susceptibility of alloy 310S stainless steel after long term exposure on supercritical water at 500℃[J].The Journal of Supercritical Fluids,2017,120(1):161-172.
• [3]Xu D H,Huang C B.Salt deposition problems in supercritical water oxidation[J].Chemical Engineering Journal,2015,279:1010-1022.
• [4]Sim S,Cole I S.A review of the protection strategies against internal corrosion for the safe transport of supercritical CO2 via steel pipelines for CCS purposes[J].International Journal of Greenhouse Gas Control,2014,29:185-199.
• [5]TANG Xing-ying(唐兴颖),WANG Shu-zhong(王树众),XU Dong-hai(徐东海),et al.Corrosion behavior of 316L stainless steel in city sewage sludge treated by supercritical water oxidation(超临界水氧化城市污泥中316L不锈钢的腐蚀行为)[J].Corrosion and Protection(腐蚀与防护),2011,32(7):501-506.
• [6]ZHANG Zhao-en(张召恩).Study on corrosion behavior and mechanism of GH625 alloy and 316 L stainless steel in supercritical water oxidation environment(GH625合金和316 L不锈钢在超临界水氧化环境中的腐蚀行为及机理研究)[D].Shenyang(沈阳):Institute of metal research,Chinese Academy of Sciences(中国科学院金属研究所),2005.
• [7]ZHU Fa-wen(朱发文),ZHANG Le-fu(张乐福),QIAO Pei-peng(乔培鹏),et al.Corrosion Behaviors of Candidate Materials for Supercritical-Cooled Water Reactor(超临界水堆候选材料的腐蚀特性研究)[J].Nuclear Power Engineering(核动力工程),2009,30(5):62-66.
• [8]Behnamian Y,Mostafaei A,Kohandehghan A.Corrosion behavior of alloy 316L stainless steel after exposure to supercritical water at500℃for 20,000 h[J].The Journal of Supercritical Fluids,2017,127:191-199.
• [9]Ren X,Sridharan K.Corrosion behavior of alloys 625 and 718 in supercritical water[J].Corrosion,2007,63(7):603–612.
• [10]YANG Kun(杨焜),DENG Chang-guang(邓畅光),KUANG Zi-qi(邝子奇),et al.Properties of Ti O2 coating deposited by atmospheric plasma spraying and thick coating fabrication process(大气等离子喷涂Ti O2涂层性能及厚涂层制备工艺)[J].China Surface Engineering(中国表面工程),2014,27(4):12-18.
• [11]WANG Yin-zhen(王引真),SUN Yong-xing(孙永兴),SONG Yu-qiang(宋玉强),et al.Wet corrosion behavior of plasma spray Al2O3 ceramics coating steel 1Cr18Ni9Ti(等离子喷涂Al2O3涂层腐蚀失效机制)[J].Corrosion Science and Protection Technology(腐蚀科学与防护技术),2002,14(4):227-229
• [12]ZHANG Yu-juan(张玉娟),ZHANG Yu-chi(张玉驰),SUN Xiao-feng(孙晓峰),et al.Development status of thermal barrier coatings(热障涂层的发展现状)[J].Material Protection(材料保护),2004,37(6):26-29.
• [13]ZHANG Xin-ge(张新格).Study on low voltage plasma sprayed MCr Al Y coating and its high temperature corrosion resistance(低压等离子喷涂MCr Al Y涂层及其高温腐蚀性能研究)[D].Kunming(昆明):kunming university of science and technology(昆明理工大学),2015.
• [14]MI Liang(糜亮),ZHOU Can-xu(周灿旭),DING Yi(丁毅),et al.Plasma sprayed Ti O2 coating and its photo-catalytic property(等离子喷涂Ti O2涂层及其光催化性能研究)[J].Surface Technology(表面技术),2009,38(6):29-31.